Steering Knuckle & Spacer Atrax Custom You may purchase the G4

You may purchase the G4 without battery and make or source your own

Continuous discharge rating of at least 100A

there is a 'hump' on the deck to accommodate the additional cells underneath

The S2 is also available as a DIY Chassis

adapted for the BajaBoard

Steering Knuckle & Spacer Atrax Custom You may purchase the G4Steering knuckle is used across all BajaBoard models. All knuckles come with 2 x knuckle bearings and tie rod end already installed. Please carefully select the corner of the board you intend to install the knuckle, as the position of the tie rod end will change depending on this. Front left and rear right of the board are the same; front right and rear left are the same. On Atrax models, the knuckle is further assembled with a spacer. If you are